TagPolymer KHC TP-2100 is a fluorescent tagged polymer. It enables real-time measurement of polymer residual to adjust polymer dosage to prevent scale formation and deposit in heat exchanger and cooling towers. It is comparable with Dow Acumer 2100 in terms of inhibition of calcium phosphate and calcium carbonate scale and dispersion of Zn, iron, manganese and suspended solids. The difference is that the concentration of TagPolymer KHC TP-2100 can be measured and adjusted online in real-time with its fluorescent tag to prevent scale and deposit, but Acumer 2100 does not have a fluorescent tag to enable online measurement and control. It is recommended to uses online fluorometer (e.g. fluorometer or Tag fluorescence probe) and a controller to measure and adjust TagPolymer KHC TP-2100 dosage. Online adjustment of TagPolymer KHC TP-2100 to a desired residual dosage can compensate proactively for loss of polymer due to Ca, phosphate, alkalinity and temperature excursions and upsets, so it can proactivelyprevent operational problems with heat exchangers and cooling towers. Since TagPolymer KHC TP-2100 automatically doses more to compensate for both routine and special causes of system variation, it leaves you a peace of mind that your operation is in control 24*7 and provides a return on your investment through their unique control and diagnostic capabilities.

CAS No.  8001-54-5 or 63449-41-2, 139-07-1

Molecular weight:  340.0

Molecular Formula:  C21H38NCl           

Structural Formula:

CAS No.:26172-55-4, 2682-20-4

Molecular weight:115.16

tructural Formula:

Product Description   

KHC563 is a thiadiazole type metal deactivator, mainly used in gear oil, which can solve the contradiction of competitive adsorption between metal deactivator and sulfur bearing extreme pressure antiwear agent in oil, not only has excellent metal deactivator, but also can keep good extreme pressure performance of oil.

Product Description   

KHC 3053 Semi-ester type rust inhibitor is an excellent ash free rust inhibitor with good solubility in Class I, II and III base oils. At the same time, the acid value is low, and it can be used in the condition that the acid value is required.

Product Description   

KHC 3052 Gemimidazoline type rust inhibitor is an excellent ash-free rust inhibitor with good solubility in Class I, II and III base oils. At the same time, the acid value is low, and it can be used in the condition that the acid value is required.

Product Description 

The quality of KHC-3030 is BASF IRGAMET 30 equivalent. KHC3030, a triazole derivative, is a liquid, oil soluble, metal deactivator. 

Product Introduction

N-phenyl-alpha-naphthylamine, product number T531, is the light yellow crystal. It has excellent high temperature antioxidant properties and is mainly used in various aviation lubricants and other industrial lubricants. This product is mainly used to improve the high temperature antioxidant properties of synthetic oil and mineral oil. The product has good solubility in oil, and the antioxidant effect is obvious, so it can prolong the oxidation induction period, improve the initial temperature of oil, reduce fuel consumption, and greatly extend the oil working life.

Product Introduction

This product is a corrosion inhibitor of copper. It can be used as a metal deactivator in the lubricants, and has great extrusion and anti-wear properties. T561 has the excellent oil solubility, copper corrosion inhibition and oxidation resistance, which can greatly improve the oxidation resistance of Daqing paraffin base oil when used in internal combustion engine oil. It can also be used in the two-stroke petrol engine oil to improve the anti-swelling performance of the oil.

Product Introduction

This product is an inorganic coolant compound, does not contain phosphate, amine and nitrite, can provide excellent protection for the copper, the brass, the steel, the cast iron, the solder, the cast aluminum and other metal materials in the engine cooling system, especially the aluminum alloy materials protection, so it can be applied for the production of high quality environmental protection engine coolants. Product standard: The engine coolants produced with KHC1022 meet the international and the domestic standards including GB 29743-2013, NB/SH/T 0521-2010, ASTM D3306, SAE J1034, JISK2234, and BS6580, etc.