Product Introduction
The product is a high performance sintered conductive adhesive, which is made of special powder, bonding material and organic carrier with excellent electrical conductivity.
Performance Parameters
Item | KH-8080F |
Appearance | Silvery grey viscous liquid |
Solid content | 86±2% |
Fineness | ≤10μm |
Viscosity | 500±100Pa·S |
Drying condition | 120℃~150℃/5~10min |
Sintering condition | ≥550℃/3~10min |
Fired state | Silver |
Sheet resistance | ≤10mΩ/□ |
Welding strength | ≥150N |
Weldability, 15μm | 300℃ electric soldering iron, 305 tinfoil, 3s, tin area ≥95% |
Welding resistance, 15μm | 300℃ electric soldering iron, 305 tinfoil, 7s, tin area ≥80% |
Hardness | ≥6H |
Product Characteristics
1. The adhesion between the product and the glass is good, and the weather resistance is excellent.
2. Good weldability, to ensure the welding strength of the silver wire and welding components, not easy to fall off.
3 The product offers excellent printability, ensuring long-lasting printing without screen drying. It delivers sharp lines, resists ink spreading, and prevents breakage.
4. The product exhibits excellent resistance to thermal shock, with minimal resistance variation.
5. The product exhibits uniform properties and maintains minimal resistance fluctuation during long-lasting printing.
Application Field
It is especially suitable for producing conductive circuit of glass substrate.
Usage Parameters
1. Printing: 150~300 grid polyester wire mesh or steel wire mesh;
2. Curing method: sintering.