Product Description  

KHC-AO, an imidazoline derivative, is a multi-functional additive that can be used as a lubricant corrosion inhibitor, emulsifier and other multi-functional additives.

Product Description  

KHC SO is an N-acylcreatine derivative that can be used as a corrosion inhibitor in lubricants, greases and fuel oils.

Product Description

KHC018 is a high-quality viscosity index improver of the stellate polymer styrene-diene, especially suitable for the complete synthesis applications. It can be used to meet the strict performance requirements of the diesel and the gasoline engine oil specifications.

This Organic Coolant Fluid Additive Package is compound by Organic acids - OAT technology. Coolant blended by this package has anti-rust and anti-corrosion function to the metal of light and heavy duty vehicle cooling system. It has an excellent performance on long life of light duty vehicles. It has an excellent performance on preventing cavitations’ erosion of heavy duty vehicles

Product Introduction

This product is an inorganic coolant compound, does not contain phosphate, amine and nitrite, can provide excellent protection for the copper, the brass, the steel, the cast iron, the solder, the cast aluminum and other metal materials in the engine cooling system, especially the aluminum alloy materials protection, so it can be applied for the production of high quality environmental protection engine coolants. Product standard: The engine coolants produced with KHC1022 meet the international and the domestic standards including GB 29743-2013, NB/SH/T 0521-2010, ASTM D3306, SAE J1034, JISK2234, and BS6580, etc.

Product Introduction:

General gear oil compound TE4204 is a newly developed low-odor environmentally friendly product with a viscosity of 80W/90 modulated by 3.8% dosing

The vehicle gear oil passed the Southwestern Research Institute (SWRI) CRC L-42, CRC L-33-1, CRC L-37-1 and CRC L-60-1 bench tests

The quality is higher than GL-5 level.

Product Description

TE1017 dimer acid is a viscous, liquid dicarboxylic acid that provides elasticity and hydrophobicity to various polymers. They are mainly used in polyamide resin products and polyesters. Dimer fatty acids are oligomerized by C18 unsaturated fatty acids.

TagPolymer KHC TP-2100 is a fluorescent tagged polymer. It enables real-time measurement of polymer residual to adjust polymer dosage to prevent scale formation and deposit in heat exchanger and cooling towers. It is comparable with Dow Acumer 2100 in terms of inhibition of calcium phosphate and calcium carbonate scale and dispersion of Zn, iron, manganese and suspended solids. The difference is that the concentration of TagPolymer KHC TP-2100 can be measured and adjusted online in real-time with its fluorescent tag to prevent scale and deposit, but Acumer 2100 does not have a fluorescent tag to enable online measurement and control. It is recommended to uses online fluorometer (e.g. fluorometer or Tag fluorescence probe) and a controller to measure and adjust TagPolymer KHC TP-2100 dosage. Online adjustment of TagPolymer KHC TP-2100 to a desired residual dosage can compensate proactively for loss of polymer due to Ca, phosphate, alkalinity and temperature excursions and upsets, so it can proactivelyprevent operational problems with heat exchangers and cooling towers. Since TagPolymer KHC TP-2100 automatically doses more to compensate for both routine and special causes of system variation, it leaves you a peace of mind that your operation is in control 24*7 and provides a return on your investment through their unique control and diagnostic capabilities.

CAS No.  8001-54-5 or 63449-41-2, 139-07-1

Molecular weight:  340.0

Molecular Formula:  C21H38NCl           

Structural Formula:

CAS No.:26172-55-4, 2682-20-4

Molecular weight:115.16

tructural Formula: